Top 10 Best Exhaust For 454 Engine Based On Scores

Last Update:

You can trust our selection for Exhaust For 454 Engine Reviews. Because We have worked hard studying and analyzing 60131 reviews for Exhaust For 454 Engine and rating them. It was a difficult job to list only ten products for Exhaust For 454 Engine where thousands of them available online. I hope it will help you to take final decision for Best Exhaust For 454 Engine.

Best Exhaust For 454 Engine

Comparison Chart for Best Exhaust For 454 Engine

60131 reviews were considered when writing our recommendations for the Exhaust For 454 Engine in this article.

NoProductScoreAction
1Chevy BB 396 402 454 Hydraulic Flat Tappet Lifters & 5/16" Intake & exhaust Push rods9.6Check Price On Amazon
2Remflex 2013 Exhaust Gasket for Chevy V8 Engine9.4Check Price On Amazon
3Chevrolet & GMC Full-size Vans (68-96) Haynes Repair Manual (Does not include information specific to 454 engine or diesel engine information, or 1996 Express and Savana models.)9.4Check Price On Amazon
4SHINEHOME Car 1200 Degree Spark Plug Wire Boots Heat Shield Protector Sleeve Cover Compatible with SBC BBC 350 454 8PCS9.4Check Price On Amazon
5ALLOYBOLTZ - BIG BLOCK CHEVY BBC 396 400 427 454 STAINLESS STEEL ENGINE HEX BOLT KIT9.2Check Price On Amazon
6Mophorn Exhaust Header Set 1 3/4" Exhaust Turbo Headers9Check Price On Amazon
7Edelbrock 2701 Performer Intake Manifold8.8Check Price On Amazon
8Remflex 2003 Exhaust Gasket for Chevy V8 Engine8.6Check Price On Amazon
9NEW SOUTHWEST SPEED BLACK 1975-1991 GM TRUCK LONG TUBE HEADERS FOR BIG BLOCK CHEVY 396-454 ENGINES8.2Check Price On Amazon
10Remflex 2058 Exhaust Gasket for Chevy V8 Engine8.2Check Price On Amazon

Table Of Content:

1. Chevy BB 396 402 454 Hydraulic Flat Tappet Lifters & 5/16″ Intake & exhaust Push rods

2. Remflex 2013 Exhaust Gasket for Chevy V8 Engine

  • 2-5/32″ Diameter Large Tube Round Race Port; Chevy V8 – 396, 402, 427, 454, (’65-’90), 2-5/32″ Large Tube Round Race Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1412
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

3. Chevrolet & GMC Full-size Vans (68-96) Haynes Repair Manual (Does not include information specific to 454 engine or diesel engine information, or 1996 Express and Savana models.)

  • Haynes Chevrolet and GMC Vans (68 – 95) Manual (24080)

4. SHINEHOME Car 1200 Degree Spark Plug Wire Boots Heat Shield Protector Sleeve Cover Compatible with SBC BBC 350 454 8PCS

  • Affordable Reliable and Built to Last】SHINEHOME aims to offer brand new and high quality Replacement Set of 8 Black Spark Plug Wire Boot Sleeves for SBC BBC 350 454 ,Made From Double Wall Braided Fiberglass Sleeving (Triple Wall At Sewn End), you will find it is affordable reliable and built to Last, at least you can use for a long time.
  • Compatibility】Fits All Spark Plug Boots And Wires Up To 1200 Degrees Fahrenhett (648.89° C)
  • Product Highlights】Each Boot Is 6inch Length,Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots.
  • Easy Installation】Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented Insultherm Technology.
  • Package】8 Black Spark Plug Wire Boot Sleeves(Note: only fit for vehicles which burning petrol), You Will Enjoy 12 months Once You Order From Us, Any Question You Can Contact With Us Via Email.

5. ALLOYBOLTZ – BIG BLOCK CHEVY BBC 396 400 427 454 STAINLESS STEEL ENGINE HEX BOLT KIT

  • Dress Up Your Chevy 396-402-427-454 Engine with our 236 Piece stainless steel hex bolt kit!! This kit has a natural stainless finish.
  • This Bolt Kit Fits All 396 402 427 454 Chevy Engines(Non-EFI).
  • Kit comes with components for the Intake Manifold- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley – Fan Pulley – Carb Stud Kit.
  • The carb stud kit fits Carter, Edelbrock, or Holley Carbs.
  • Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These extra thick washers are designed to Clear Large Tube Headers.

6. Mophorn Exhaust Header Set 1 3/4″ Exhaust Turbo Headers

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding process, it features with maximum durability and rigidity, which assured the best performance of your vehicle.
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature.
  • Precise Dimension: It has a lightweight design.
  • Easy to Install & Use: Gaskets, bolts, and screws are included in the package, and two sets of exhaust headers can put more power through the wheels to push the vehicle.
  • Direct Fitment: These headers are designed for Universal LS Swap S10 Conversion Headers (LS1, LS2, LS3, LS6, LS Engines) Truck & SUV, capable of adding instant horsepower and increasing torque to the engine of your car.

7. Edelbrock 2701 Performer Intake Manifold

  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
  • Fit type: Vehicle Specific

8. Remflex 2003 Exhaust Gasket for Chevy V8 Engine

  • 1-13 inch width x 1-7/8 inch height Square Port; Chevy V8 – BB 396/6.
  • Port configuration comparable to Fel-Pro 1410
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

9. NEW SOUTHWEST SPEED BLACK 1975-1991 GM TRUCK LONG TUBE HEADERS FOR BIG BLOCK CHEVY 396-454 ENGINES

  • Pair of New Southwest Speed Flat Black Performance Long Tube Headers that are direct fit for 1975-1991 GM Trucks with Big Block Chevy 396-454 Cu.
  • This pair of Southwest Speed Performance Long Tube Headers offer an immediate increase in performance by eliminating backpressure, improving exhaust flow, and building more horsepower > The consistent tubing diameter contributes to the smooth air flow and greater exhaust velocity of these headers.
  • These headers are a direct replacement for 1975-1991 Chevy and GMC Trucks, Suburban’s, Blazers, and Jimmy’s with Big Block Chevy 396-454 Cu.
  • Includes a pair of 2 1/2″ reducers to complete the installation > Will not fit angle plug heads
  • Features: > Performance Long Tube Headers > 1 3/4″ Primaries to the 3″ Collectors > 2 1/2″ Reducers > More Performance > Increases Horsepower and Torque > Better Fuel Mileage > Great Choice to replace cast iron exhaust manifolds > Enhances the looks of the engine compartment > Includes gaskets and mounting hardware > Painted Flat Black to resist early corrosion.

10. Remflex 2058 Exhaust Gasket for Chevy V8 Engine

  • 1-7/8 inch width x 1-15/16 inch height Square Port; Chevy V8 – GMC TRUCK – BB Vortec 7.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • Fit type: Universal Fit

How To Choose The Best Exhaust For 454 Engine

Does the thought of finding a great Exhaust For 454 Engine stress you out? Has your mind been juggling between choices when it comes to buying Exhaust For 454 Engine in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Exhaust For 454 Engine for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Exhaust For 454 Engine. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Exhaust For 454 Engine in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Exhaust For 454 Engine currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Exhaust For 454 Engine brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Exhaust For 454 Engine based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Exhaust For 454 Engine before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Exhaust For 454 Engine they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Exhaust For 454 Engine, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Exhaust For 454 Engine before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Exhaust For 454 Engine will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Exhaust For 454 Engine if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Exhaust For 454 Engine on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Exhaust For 454 Engine on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Exhaust For 454 Engine featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment

Your email address will not be published.